Tarrington House MAC2320C, Instruction Manual

Page: 4 / 218

- 4 -
GB
ensure that nobody can pull on
or trip over it unintentionally.
4. Do not insert fingers or foreign
objects in any opening of the
appliance and do not obstruct
the air vents.
5. Protect the appliance against
heat. Do not place close to open
flames or heat sources such as
stoves or heating appliances.
Battery safety instructions
1. Danger of explosion! Battery
may not be charged, reactivated
by other means, disassembled,
thrown into fire or short-circuited.
2. Do not expose battery to
extreme temperatures, like
direct sunlight or fire. Do not
place the remote control on any
heat source. Leaking battery
acid may cause harm.
3. If the battery should leak,
remove it with a cloth from
the battery compartment.
Dispose of battery according to
regulations. If battery acid has
leaked, avoid contact to skin,
eyes and mucous membranes.
Rinse affected areas
immediately after contact with
the acid and wash with plenty
of clean water. Visit a physician.
4. Caution! Danger of explosion if
battery is incorrectly replaced.
Replace battery only with the
same or equivalent type.
5. Always insert battery correctly
with regard to the polarities (+
28. Do not leave the appliance
unattended while in use.
29. Clean or exchange the filters
regularly to prevent insufficient
air flow caused by a build-
up of dust. Poor air flow will
cause a risk of overheating and
reduce the performance of the
appliance.
30.
Important!
Allow the appliance
to stand upright for at least
24 hours before connecting it
to a mains outlet for the first
time, so that the refrigerant
can settle. The same applies if
the appliance has been moved
to any other but an upright
position at a later date.
31. The appliance can cover an
area of max. 15m
2
(MAC2320C),
18m
2
(MAC2540C) or 23m
2
(MAC3540C).
Electrical safety
1. Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the power
supply.
2. Do not operate any appliance
with a damaged power cord
or plug, when the appliance
malfunctions or has been
damaged in any manner.
3. Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames and