Targus ExpressCard Notebook Docking Station with Digital Video and Audio
Why does my system crash during boot up with the Card
connector installed?
Try switching the Pre-boot switch to the “on” position and boot
again.
Can two separate displays be connected to the ExpressCard
Docking station (VGA and DVI-D) and display two separate
images or work to extend the display across three screens
(including the notebook’s screen)?
No. The output from the VGA port and the DVI port are the same.
My screen becomes blank (black) when I connect the
ExpressCard to my computer.
Make sure the ExpressCard is properly connected and check the
display mode in the system tray so that the setting is correct.
Audio
I cannot hear anything through my notebook’s speakers.
Some notebooks default to the ExpressCard docking station’s
onboard USB Audio device when the docking station is connected,
disabling your notebook’s built in speakers. To enable your
notebook’s speakers, do the following:
1. Open the Control Panel, and select “Sounds and Audio
Devices”.
2. On the “Audio” tab under the “Sound Playback” section, select
your notebook’s internal audio device (will be a device other
than the USB audio device of the docking station).
If you still cannot get the audio device to play from your
speakers:
1. Open the Control Panel, and select “Sounds and Audio
Devices”.
2. On the “Audio” tab under the “Device Volume” section, click
“Advanced”.
3. Uncheck the “Mute All” box.
NOTE: YOU WILL NEED TO CLOSE ANY APPLICATIONS THAT ARE
USING AUDIO AND RESTART THEM IN ORDER TO ENABLE THIS
CHANGE.
