Targus ExpressCard Notebook Docking Station with Digital Video and Audio
Troubleshooting
Device Not Working
• Make sure that the device is fully inserted into the correct port
on the docking station.
• Plug the device into a different port on the docking station. If it
still doesn’t work, test the device by connecting it directly to your
computer.
• Verify that you ran the Setup or Install program for the device.
• Make sure that the device appears in Device Manager. For more
information refer to “Verifying Devices are Installed”.
• Disconnect all devices from the docking station and reconnect
them, one at a time. Check that each device works before
plugging in the next one.
• Each USB port is equipped with over-current protection. Should
a USB device draw more current than the USB port can supply,
the port will shut down. To re-enable the port, unplug the device
and go to
Device Manager
or to the message in the system
tray and choose the
Reset
option. You can then plug the device
back into the USB port. If a shut down reoccurs, check the
power requirements of the device.
