Targus ExpressCard Notebook Docking Station with Digital Video and Audio
Installing the Docking Station
Driver
Installing the docking station driver enables your operating system
to recognize the docking station and its ports once it’s connected.
To install the docking station driver:
1. Turn on your computer.
2. Insert the driver software CD into your computer’s CD-ROM
drive.
If setup does not begin automatically, click
Start
,
Run
, and enter
D:\Setup.exe
(where D: is the path of your CD-ROM drive) and
then click
OK
.
3. The
Installation Wizard
window of the docking station will pop
up. Follow any on-screen instructions to complete the
installation. Then connect the ExpressCard into the slot when
prompted.
Assembling the AC Power
Adapter
The AC Power Adapter comes in two parts: the base section and
the pin section. These need to be assembled before you can use
the adapter with the docking station.
To Assemble the AC Power Adapter
1. Align the teeth on the back of the pin section with the
corresponding markings on the base section.
