99
step 3: attach front rail and rear rail to partition
(H1)
x 2
wooden dowel
(H2)
x 2
cam bolt
(H3)
x 2
cam
(H4)
x 4
small pan
head screw
(H7)
x 2
magnet catch
3.1. Align pan head screws with pre-drilled holes to attach door magnets to front rail. Do not over tighten screws.
3.2. Carefully tap small wooden dowels into place in front rail and rear rail. Leave 1/2” of the dowels sticking out.
3.3. Screw-In cam bolts must be screwed down flush in front rail and rear rail.
3.4. Refer to page 6 for instructions on how to use the cam lock system.
3.5. Do not over tighten bolts.
finished edge
finished edge
(H4)
x 4
small pan
head screw
(H7)
x 2
magnet catch
(H1)
x 2
wooden dowel
(H2)
x 2
cam bolt
(H3)
x 2
cam
