12
step 6: attach top panel
(H8)
x 4
bolt
(H9)
x 4
lock washer
(H16)
x 4
washer
(H1)
x 6
wooden dowel
(H2)
x 2
cam bolt
(H3)
x 2
cam
(H19)
x 1
allen wrench
6.1. Carefully tap small wooden dowels into place in side panels and rear upper rail. Leave 1/2” of the dowels sticking out.
6.2. Screw-In cam bolts must be screwed down flush in top panel.
6.3. Refer to page 6 for instructions on how to use the cam lock system. Do not over tighten bolts.
6.4. Align bolts with pre-drilled holes to attach side panels to top panel. Do not over tighten bolt.
6.1. Carefully tap small wooden dowels into place in side panels and rear upper rail. Leave 1/2” of the dowels sticking out.
6.2. Screw-In cam bolts must be screwed down flush in top panel.
6.3. Refer to page 6 for instructions on how to use the cam lock system. Do not over tighten bolts.
6.4. Align bolts with pre-drilled holes to attach side panels to top panel. Do not over tighten bolt.
