step 10: assemble drawer box
(H1)
x 8
wooden dowel
(H13)
x 2
small cam bolt
(H14)
x 2
small cam
(H6)
x 10
large flat head
screw
10.1. Align flat head screws with pre-drilled holes to attach drawer sides to drawer face. Do not over tighten screws.
10.2. Carefully tap small wooden dowels into place in drawer face and drawer supports. Leave 1/2” of the dowels sticking out.
10.3. Screw-In cam bolts must be screwed down flush in drawer face.
10.4. Refer to page 6 for instructions on how to use the cam lock system. Do not over tighten bolts.
10.5. Align flat head screws with pre-drilled holes to attach drawer back. Do not over tighten screws.
16
(H6)
x 10
large flat head
screw
10.1. Align flat head screws with pre-drilled holes to attach drawer sides to drawer face. Do not over tighten screws.
10.2. Carefully tap small wooden dowels into place in drawer face and drawer supports. Leave 1/2” of the dowels sticking out.
10.3. Screw-In cam bolts must be screwed down flush in drawer face.
10.4. Refer to page 6 for instructions on how to use the cam lock system. Do not over tighten bolts.
10.5. Align flat head screws with pre-drilled holes to attach drawer back. Do not over tighten screws.
