DRAFT
6
3.0
Operating panel
The fully automatically machines are basically operated from the operating panel on top of
the frame.
This manual explains all the buttons, lamp and switches for each technical operation, with
references to the illustration below.
If you have never operated a similar
machine before, or you have moved
to a new working area with new
supplying electricity, it is essential to
carry out the test procedure before
connecting any electricity or operate
any buttons. The test procedure is
explained on the next page.
Explanation of the buttons
1. Reversing switch.
To choose correct motor running
direction.
2. Emergency stop. Push down and all
electricity are cut of.
3. Yellow lamp. Is turned on when
electricity is connected
to the machine.
4. GREEN - Start button main motor.
Automatic star/delta start.
5. RED - Stop button main motor.
6. GREEN - Lamp. Is turned on when
the main motor are running
7. RED - Lamp. Turns on when main
motor are overloaded.
8. GREEN - Start button feeding motor.
Automatic star/delta start
9. 9. RED - Stop button feeding motor.
10. GREEN - Lamp.
Is turned on when the feeding motor
running
11. RED - Lamp.
Turns on when feeding motor are
overloaded.
12. Lowering hydraulic cylinders.
13. Raising hydraulic cylinders.14.
Activating of rear wheel hydraulic
cylinder.
15. Connector.
Input of electricity.
(16. Correct motor running direction.)
Summary of Contents for FS 1218 EX
Page 2: ...DRAFT 2 ...