22
ECO II FEEDING rev.06
ECO II FEEDING
2.5.2 Installation Settings
• The following installation menus are only available from the installer mode.
Enter the installer password .............................. section 5.2
• Step through all the installation menus; the parameters contained in these menus
allow customizing the controller for your specific application.
Main Settings .................................................. section 5.3
Scale Settings.................................................. section 5.4
Loop Settings .................................................. section 5.6
Bin Settings ..................................................... section 5.7
Drop Settings .................................................. section 5.8
Time Clock Relay Assignment ............................ section 5.9
55
ECO II FEEDING rev.06
ECO II FEEDING
8.2
Bin Management
8.2.1 Bin Refill and Feed Consumption
The bin information menu allows knowing the amount of feed remaining in each bin
and monitoring the amount of feed taken from each bin. Every new feed entry in the
bins must be posted in the controller.
Select
3. Bin information
• Select a bin
The following readings and parameters
are associated with the chosen bin and
must be set separately for each bin in
use.
• Used today
Amount of feed that has been taken
from the selected bin today.
• Add new feed
Enter the amount of feed that has been added to the selected bin. The entered
value flashes for 10 seconds and then returns to 0. The value is transferred in
today’s added feed menu and is added to the remaining feed count.
• Used yesterday
Amount of feed that has been taken from the selected bin yesterday.
• Added today
Amount of feed that has been added since the beginning of the day.
• Added yesterday
Amount of feed that has been added to the selected bin yesterday.
• Total consumption
Amount of feed that has been taken from the selected bin since the beginning
of the batch.
• Overfill
This is the leftover quantity of feed that falls into the scale after the bin auger
motor is stopped.
* Only accessible from the installer mode (sec. 5.2).
Main Menu
2.
Blend curves
3.
Bin information
Bin information
Exit: Press BACK
Change: Press Modify
Press to Select an item
Select Bin #
1
Remaining in bin
1570 kg
Used today
75 kg
Add new feed
0 kg
Used yesterday
120 kg
Added today
0 kg
Added yesterday
0 kg
Total consumption
3240 kg
Overfill
0
