64
ECO II FEEDING rev.06
ECO II FEEDING
12. INSTALLATION REPORT
CLIENT
Name:
__________________________________________
Address: __________________________________________
__________________________________________
__________________________________________
City:
__________________________________________
Phone:
__________________________________________
Fax:
__________________________________________
INSTALLER
Name:
__________________________________________
Address: __________________________________________
__________________________________________
__________________________________________
City:
__________________________________________
Phone:
__________________________________________
Fax:
__________________________________________
13
ECO II FEEDING rev.06
ECO II FEEDING
• Option 4
(steady feed cycles with blend curves and without feed blends)
Principle of Operation:
The controller delivers feed according to the settings of each drop's blend
curve: when the feed cycle of a blend curve is active, the controller sends the
ingredient and dosage that suit the drop's animal age. These feed cycles are
performed on a daily basis.
Refer to section 2.4.3 to get information about the drops’ filling process when
using feed cycles.
Settings:
Enable the blend curve (section 5.3).
Disable feed blends (section 5.3).
Blend curve settings:
Select the ingredient and dosage according to the animal age (section 6.1.2.1).
Select the blend curve used by each drop (section 6.3).
Disable the Continuous Feeding option (section 5.3).
Set the start time of each feed cycle (section 6.2).
Disable the “Active Feed Cycles in Curve” option (section 5.3).
Select on which feed cycle(s) the drops are being filled (section 6.3).
• Option 5
(variable feed cycles with blend curves and feed blends)
Principle of Operation:
The controller delivers feed according to the settings of each drop's blend
curve: when the feed cycle of a blend curve is active, the controller sends the
feed blend and dosage that suit the drop's animal age. The activation of feed
cycles is also based on the animal age.
Refer to section 2.4.3 to get information about the drops’ filling process when
using feed cycles.
Settings:
Enable the blend curve (section 5.3).
Enable feed blends (section 5.3).
