Target ECO I FEEDING, User Manual, Page: 13 / 43

32
TARGET ECO I FEEDING, rev.09
TARGET ECO I FEEDING
8.2 Alarm Log
When an alarm occurs, the alarm LED turns
on and the alarm is recorded in the alarm
log menu, along with the time and date.
The system keeps in memory the previous
50 alarm situations.
Select
9. Alarm Log
• Use the arrow keys to select an alarm.
The date and the time at which the selected
alarm condition occurred are displayed at
the top of the display.
Alarm Acknowledge
Exit: Press BACK
Press to Select an item
No alarm to ack ...
Alarm Log
Exit: Press BACK
Press to Select an item
Logged on April 22 200X
8:20A
Module ID 4
Module communication error
8.3 Acknowledging an Alarm
The following procedure shows how to
acknowledge. Make sure the problematic
situation has been fixed before acknowl-
edging the alarm.
Select
10. Alarm acknowledge
• Select the alarm that needs to be acknowl-
edged.
• Use the arrow keys to acknowledge the
alarm.
13
TARGET ECO I FEEDING, rev.09
TARGET ECO I FEEDING
4. USER INTERFACE
4.1 Location of the Controls
• Main LCD Screen
The large LCD screen is used to display
the various parameters and menus. The
Current Conditions menu is automatically
selected after 4 minutes of inactivity.
Contrast — Open the front cover of the
controller to access the potentiometer to
adjust the screen contrast. If no
potentiometer is located behind the front
panel, the contrast must then be changed
directly into the transfer menu (see
chapter 10).
• Alarm status LEDs:
The alarm status led turns on when an
alarm condition is detected; it flashes if an
alarm condition has occurred and has been
restored by itself.
• Back button:
This key is used to return to the previous
menu.
• Arrow keys:
Use these buttons to select an item on the
main LCD screen. These keys are also used
to adjust a parameter value when it is
flashing on screen.
• Enter / Modify button:
Press the Enter/Modify button to access a
menu or press it to modify the value of a
parameter. Refer to section 4.2 to get more
information about parameter adjustments.
-
+
LCD CONTRAST
POTENTIOMETER
(opt.)