background image

 

Care and Maintenance

 

 

• 

Use a soft, clean cloth that will not scratch the surface when dusting.

 

• 

Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.

 

• 

Using solvents of any kind on your furniture may damage the finish.

 

• 

Never use water to clean your furniture as it may cause damage to the finish.

 

• 

Always use coasters under beverage glasses and flowerpots.

 

• 

Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.

 

• 

Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.

 

• 

Stains or marks from crayons or ink markers will be difficult to remove.

 

• 

In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.

 

• 

Check bolts/screws and nuts periodically and tighten them if necessary.

 

 
 
 

Further Advice about Wood Furniture Care

 

 

It is best to keep your furniture in a climate

-

controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and 

splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish.

 

 

Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

 

 

We hope you enjoy your purchase for many years.

 

Thank you for your purchase!

 

 
 
 

 

QUALITY GUARANTEE

 

 

We are confident that you will be delighted with your Whalen Furniture purchase.

 

 

Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. 

Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.

 

 

This warranty gives you specific al rights and you may also have other rights which vary from state to state or province to province.

 

 

Customer Service: 1

-

855

-

MYTGTHOME (855

-

698

-

4846)

 

8:30 a.m. 

-

 4:30 p.m., PST, Monday to Friday

 

www.whalenfurniture.com

 

26

 

Summary of Contents for 249-14-5790




























Reviews: