24
step 17. install drawer kits to the unit
17.1. To insert the assembled drawers into the frame, simply push the ball bearing cart all the way to the end of the slides (on both sides), and align the slide
runners on the drawers with the slides track on the unit. Push it carefully inside until it stops.
NOTE
: If the drawer does not go smoothly, please take it out and repeat the step.
17.2. Plug the cam lock covers (H10) into the visible cam locks to conceal the cams.
17.3. Insert the grommet (16) to cover the hole in the top panel (A).
Ball bearing cart
Ball bearing cart
Drawer installation
Release lever
Release lever
(H10) x 4
cam lock cover
A
H16
H10
L
K
F
H
(H16) x 1
grommet with
cap
