step 18: Attach tipping restraint hardware
(H12) x 1
tipping restraint hardware kit
(inside plastic bag)
25
Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and
1/8”
drill bit.
18.1. Adjust the pre
-
attached floor levelers to level the unit against a wall.
18.2. Follow the instructions printed on plastic bag containing tipping restraint hardware to attach tip
-
over restraint between the unit and the wall.
NOTE:
Share the back panel screw hole for the anti
-
tipping hardware.
You must use this tipping restraint to attach this unit to the wall, to prevent accidents
and / or injures.
Floor leveler
Metal bracket
Long screw
Wooden stud
Short screw
Wall
Wall
