background image

Conformity 

 

Navigation Device PNA-E3520/PNA-E3520T 

11 

Im

po

rt

an

S

a

fety

 N

otice

 

 

Using the earphones at high sound volume can damage your hearing 
and cause nuisance to your surroundings.

 

 

Under dangerous circumstances (for example when driving a vehicle 
or when working with machines) the sound may distract your attention 
or prevent you from being aware of what is happening around you.

 

 

The supplied earphones EE-640V-41EN must be used with this 
navigation device exclusively.

 

1.9 

Conformity 

This device fully complies with the basic and other relevant 
requirements of the Vehicle Directive 2004/104/EC, the EMC 
Directive 2004/108/EC, and the Low-voltage Directive 2006/95/EC.

 

1.10 

Disposal of Old Devices 

If the product is labelled with a struck-out waste bin, it is subject to 
the European Guideline 2002/96/EC. All electric and electronic 
devices must be disposed of separately from household waste at 
established bodies. With the proper disposal of old devices you 

avoid damage to the environment and your personal health. For further 
information about proper disposal, contact your local government, disposal 
bodies or the shop where you bought the device.

 

 

Summary of Contents for PNA-E3520













































































































































Reviews: