manualshive.com logo in svg

Targa PNA-E3520, User Manual And Service Information, Page: 27 / 140

Share
Download
Targa PNA-E3520 User Manual And Service Information Download Page 27

Powering the Device On/Off 

 

Navigation Device PNA-E3520/PNA-E3520T 

25 

Int

rod

uctio

n

 

The external antenna must have an MMCX connector in order to connect it to 
the corresponding receptacle [page 14, item 9] on the navigation device. 

The device will receive the signals from the additional antenna automatically: 
no further settings are required. 

2.11 

Powering the Device On/Off 

To power the device on for the first time, slide the main power switch [page 14, 
item 7] into the 

On

 position. 

 

On delivery, the battery of your navigation device is not fully 
charged. Recharge the battery completely. The device can charge 
the battery also while it's powered off. 

2.11.1 

Daily Use 

To power the device off, press and hold the On/Off button [page 14, item 2] for 
approx. 3 seconds. The navigation device will switch to standby mode. 

To power the navigation device on the next time, press and hold the On/Off 
button for approx. 3 seconds. The device will resume power with the last 
opened application. 

 

The device consumes electricity in the standby mode. Therefore it 
can discharge the battery when in standby mode over a longer 
period of time. 

2.11.2 

Powering Off Completely 

To power the device off completely, slide the main power switch [page 14, item 
7] into the 

Off

 position. 

When powering the device off by using the main power switch, all parameters 
and custom settings will be saved. 

 

Summary of Contents for PNA-E3520













































































































































Reviews:

No comments