Targa Visionary LT 2210
Introduction
English - 3
Introduction
Safety Instructions
Please read the following instructions carefully.
Please keep this User's Guide for later use.
If you sell the device or pass it on, it is essential you hand over this manual
also.
Follow all warnings.
Proceed exactly as described in the instructions.
Never use the device near water.
Only use a dry and soft cloth for cleaning.
Never block the ventilation holes.
Do not place the device near heat sources such as radiators, ovens or other
appliances emitting heat (including amplifiers).
Only connect the device to a power outlet with a grounding pin. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Install the power cord in such a way that nobody can trip over it. Take special
care that the cable does not become pinched, particularly at the plug and
ports.
The power switch of this device does not fully disconnect the device from the
mains. Furthermore, the device consumes electricity in the Standby mode. In
order to completely disconnect the device from the mains, the power plug
must be pulled out from the wall outlet. For this reason, the device should be
positioned in a way that assures unobstructed access to the power outlet so
that the power plug can be immediately pulled out in an emergency situation.
To avoid the danger of fire if the device is not going to be used for a long
while (e.g. during holidays), it should always be disconnected from the power
socket.
Do not use any extension cords.
Only use the accessories recommended by the manufacturer.
Use only suitable carts, stands, brackets or tables for the device, that make it
impossible for it to fall or tip over. When a cart is used, operate carefully to
prevent the device from tipping over.
