Receiving TV Programmes
Targa Visionary LT 2210
14 - English
Receiving TV Programmes
The built-in receiver allows you to watch terrestrial TV shows via an outdoors or
indoors antenna as well as TV shows from the cable TV network. To do so,
connect the corresponding antenna cable to the RF input (see page 7, item 13)
on the back panel of your LT 2210. After connecting any antenna for the first time
you must program the channels or perform an automatic channel search.
Automatic Channel Search
With automatic channel search, your LT 2210 will store all available channels. In
order for the automatic channel search to work properly, the TV mode must be
enabled (see page 12 - Selecting the Input Source). Proceed as follows:
Press the LCD MENU
button (7) on the remote control. The TV menu will
appear.
Press
the
X
button (6) on the remote control 4 times to display the
TV-
Channel
menu.
Press
the
T
button [6] on the remote control 4 times to select the Autosave
item.
Press
the
X
button (6) on the remote control to launch the automatic channel
search.
A windows in the upper-left corner of the screen will show the life picture for the
current frequency. A progress bar will inform you of the status of the automatic
channel search. All found stations will be automatically stored in a sequential list
of channel presets.
After the search of the entire frequency band is completed you’re done. Then the
first found channel will be tuned-in. To cancel the process at any time, press
LCD
MENU
(7) on the remote control.
If you had already performed an automatic channel search in the
past, all existing preset channels will be replaced by the new ones
found.
