Getting Started
Targa Visionary LT 2210
12 - English
the LT 2210 to Standby mode and the power indicator (22) on the front panel will
light orange.
In order to also turn off the Standby mode press the Power button (1) on the back
panel of the device. The power indicator will stop lighting.
Selecting the Input Source
Press the
Input
button (21) on the remote control or the
Source
button (21) on the
control panel to select the input source.
The input source selection works also when a menu is displayed. The TV menu
will hide automatically, if open.
Via the Remote Control
Press the
Input
button (21) on the remote control. The following menu will
appear:
Press
S
or
T
(6) on the remote control to select
the desired input source. The selection is
highlighted in yellow. Press the
OK
button (20)
on the remote control to confirm the desired
option. The LT 2210 immediately toggles to the
corresponding input source.
Via the Control Panel
Press
Source
(21) to display the input source selection. Press or
CH+
(17) and
CH-
(16) on the control panel to select the desired input source. As soon as the
menu disappears, the selected input source should be visible.
