Targa External network hard disk, User Manual

Page: 10 / 115

Targa NDAS 500 eSATA English
9
Connect the Targa DataBox NDAS 500 eSATA to the supplied power adapter [A], by
inserting the power adapter connector [7] into the connector port [6] of the Targa
DataBox NDAS 500 eSATA. Plug the power adapter into a wall outlet.
Connecting via a USB Cable
If you are using Windows
®
98SE/ME:
Prior to connecting your Targa DataBox NDAS 500 eSATA to the computer, install
the driver from the supplied CD. If the CD automatically starts up once inserted,
interrupt the process by closing the window and double click the "PL2507-
USB_DISK_DRIVER.exe" file in the "Driver/Windows/Windows98SE_ME" folder to
run manually. Follow the on-screen instructions and restart the computer once the
installation is completed.
Note: The Targa DataBox NDAS 500 eSATA has been pre-formatted with the NTFS
file system (for Windows
®
Vista/XP/2000). When using it with Windows
®
98SE/ME it
must be formatted with the FAT32 file system.
If you are using Windows
®
XP/2000:
Windows
®
XP/2000 will automatically detect that a new USB device has been
connected and will install the corresponding drivers.
If you are using Windows Vista™:
Windows Vista™ will automatically detect that a new USB device has been
connected and will install the corresponding drivers.
Insert the flat connector [9] of the USB cable [B] into a free USB port on your desktop
PC or notebook. Next connect the other connector [8] of the USB cable to the USB port
[3] of your Targa DataBox NDAS 500 eSATA. Power on the Targa DataBox NDAS 500
eSATA using the On/Off switch [2].
Fig.: Operating system hardware message
example from Windows
®
XP (Windows
Vista™ is similar)