Connections
13
Preparing Remote Control
Open the battery compartment and insert the
batteries. Make sure the polarities (+ and -) match
the markings inside the remote control.
Using rechargeable batteries is not recommended.
Connecting the DVD Recorder
Remote Control Signal
The remote has an operating range of
approximately 7.5 M, and works best when
pointed directly at the unit horizontally at angle up
to 30° from the sensor window of the DVD
recorder.
Do not plug the AC power cord into the outlet until all other connections are made.
It is recommended that you connect VIDEO OUT jack of the DVD recorder directly to the
video input of your TV. Connecting VIDEO OUT jack of this recorder to a TV via a VCR
may cause a viewing problem when playing a copy-protected disc. The same viewing
problem may also occur when connecting the recorder to a TV/VCR combo system.
Connection Method
Antenna wall connector
DVD Recorder
TV
Antenna wall connector
DVD Recorder
VCR
TV
Check whether all the accessories are included in your package box.
Remote Control (1)
Batteries type AAA (2)
Audio/Video cable (1)
Power cord (1)
SCART cable (1)
Blank DVD Disc (1)
Antenna cable (1)
DVD Recorder (1)
User’s Manual (1)
HDMI-cable
(1)
Package contents
