ORIGINAL CENTRAL VW G6 / G7
36 - Brown / Red
Relay Connections:
+
MASTER
Transform NEGATIVE signal from
alarm (200mA) into PO12V
Alarm wire
85
30
+12V
87
86
ouput+12V
Purple wire
Alarm
Transform POSITIVE signal (AUDIO)
of the alarm (200mA) into POSITIVE
+12V of higher power
85
30
87
+12V
86
Battery
negative
Battery
negative
+ACC
Audio equipment
Transform NEGATIVE signal from
alarm (200mA) into NEGATIVE
of higher power
30
85
87
Alarm wire
Negative Output
86
+12V
Battery
Positive
Located above the
fuse box
11 - Red / Black
The lock, unlock, auxiliary and sound equipment outputs can handle a maximum of 200mA.
In case you need to install equipment with a consumption that is greater than 200mA, relays must be
used.
Configure Signal for Window/Electric Lock activation
5 Beeps
= VW UP
- With the door open, turn the ignition on .
- Hold the master pressed until beep 8.
- The alarm will respond informing
1 Beep
= Universal
2 Beeps
= VW G5
3 Beeps
= FIAT
6 Beeps
= MOBI
4 Beeps
= VW G6
Each press on the Master, the alarm confirms with 1 beep. After turning the ignition off , the
alarm will confirm the new setting with 4 beeps.
To change it, press the Master key 4 times, referring to the VW G6/G7 signal.
Attention:
For perfect operation, ground the alarm module properly . Some wire colors may change without
prior notice from the car manufacturer. It is necessary to test before making the connections.
+
Configure
1X = Universal
2X = VW G5
3X = FIAT
4X = VW G6
5X = VW UP
6X = MOBI
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 8 function
Function:
Closes and opens the power windows, locks and unlocks the doors.
Window activation signal setting =
VW G6 / G7
,
.
item 8
To open the windows, turn the alarm off and hold down the off button on the control.
9) Window Connections and VW G6 and G7 Electric Lock (continuation)
06
