04
Click
1 time
2 times
3 times
4 times
5 times
Alarm Response
Sensors Sensitivity
+20%
+10%
Factory Standard
-10%
-20%
1 Beep
2 Beeps
3 Beeps
4 Beeps
5 Beeps
Decrease
Increase
8.1) LED functions
- 2 consecutive blinks - ultrasound sensor.
LED ALWAYS ON -
Door, Hood or Trunk open;
LED FLASHES 2X -
Alarm on with cancelled ultrasound sensor;
LED OFF -
Alarm off;
LED FLASHING AFTER TURNING ALARM OFF BY REMOTE CONTROL
Indicates which sensor caused the last trigger:
- 1 blink - ignition
- 3 consecutive blinks - doors, hood or trunk.
LED FLASHING NORMALLY -
Alarm on;
8) Ultrasound Sensors
Attach the sensors to the vehicle's windshield, 10cm below the roof.
Ultrasound Sensors come with digital sensitivity adjustment.
Only change the default setting if necessary.
Follow the table below:
- Hold the master pressed until beep 9.
Set Ultrasound Sensitivity
- With the door open, turn he ignition on .
- The alarm will respond informing the current setting:
3 Beeps = Sensitivity
STANDARD
2 Beeps =Sensitivity
+10%
4 Beeps = Sensitivity
-10%
5 Beeps = Sensitivity
-20%
1 Beep = Sensitivity
+20%
To change, press the Master key the number of times referring to the desired sensitivity. Each
press on the Master the alarm will confirm with 1 beep. After turning the ignition off , the alarm
will confirm the new setting with beeps.
+
Configure
1X = +20%
2X = +10%
3X = Standard
4X = -10%
5X = -20%
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select Function Beep 9
MASTER
+
