Taramps Tarsafe TW10, Manual

Page: 4 / 11

- hold the master until beep 7.
The alarm will respond informing:
7) Set time to lockout (TW10 only)
3 Beeps = Blocking in 3 Minutes
- With the door open, turn the ignition on.
1 Beep = Blocking in 1 Minute
2 Beeps = 2 Minute Lockout
To change, press the Master key the number of times referring to the desired time. Each time
the Master is pressed, the alarm confirms with 1 beep. After turning the ignition, off the alarm
will confirm the new setting with beeps.
+
ON
START
OFF
Configure
Select the Beep 7 function
IGNITION MASTER
DOOR OPEN
1X = 1 minute
2X = 2 minutes
3X = 3 minutes
MASTER
+
+
+
Enable Secret Button Lock Function:
- With the door open, switch on the ignition.
2 Beeps = Secret button Function OFF
- Hold the master pressed until beep 6.
- The alarm will respond informing:
1 Beep = Secret button Function ON
+ +
IGNTION
ON
START
OFF
MASTER
DOOR OPEN
+
configure
1X enable
2X disable
Select the Beep 6 function
Attention: Function canceled from factory, It is required to be enabled by Beep 8.
6) Lock by Secret Button - required to be enabled by master. (TW10 only)
ATTENTION: In this case, it will not be possible to cancel the triggering by the control.
Operation:
With the ignition on and the doors closed, press the master key for 1 second. Otherwise, Secret Button Lock
will be enabled. After the programmed time, (according to the Beep 7 setting), the ultrasound LED starts
blinking, the audio system will be turned off, the siren and turning lights will go off, another 20 seconds, the
engine will begin failing until it is definitively Locked .To cancel the lock, press the master.
6.1) Valet Function (only for TW10 - for Secret Button Lock)
To cancel the Valet function and return to normal operation,
It is used when leaving the vehicle in a parking lot, for example, without the need to indicate to the location of
the Master (Secret Button) to the valet.
Operation:
With the door closed, turn off the ignition and hold the Master pressed
for 3 seconds. The ultrasound LED will flash 3 times confirming activation.
turn the ignition on with the door closed and press the Master for 1 second.
+ +
IGNIÇÃO
OFF
ON
START
OFF
MASTER
DOOR CLOSED
3 Seconds
After turning the ignitionoff , the alarm will confirm the new setting with beeps.
To change, press the Master key once to Enable or 2 times to Disable.
03
MASTER
+