Index
07
12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is
limited to the repairing or substitution of the device of its own making.
TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP - Brazil, ZIP CODE
19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with
solidarity, due to project vices which cause it improper or inadequate to its original use within
•Damaged products by improper installation, water infiltration, violation by unauthorized individuals;
•Tamper or torn warranty seal;
•Defects caused by accessories, modifications or features attached to the product;
•Warranty card is not properly filled or torn;
•Cases in which the product is not used in adequate conditions;
•Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;
•Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the
product.
This warranty excludes:
•The product with damage from falling, bumps or nature related problems (flooding, lightning, etc.);
Term of warranty
07 •
Term of warranty
•Technical assistance
• Smart Bass line presentation
•
Smart line presentation
08 •
Introduction
•
Key recommendations
10 •
Power supply connector
•
LEDs indicators & protection system
•
Recommended wire gauge & fuse
09 •
Functions, inputs & outputs
12 •
Technical features
11•
Installation
ENGLISH
Technical assistance
www.taramps.com.br/en/rede-de-assistencias-tecnicas
Phones: +55 18 3266-4050 / +55 18 99749-3391
E-mail:
or contact direct the factory support:
For international support, check on our website:
Smart Bass Line Presentation
Multi-impedance:
Featuring new control technology and new functions, the SMART 3 BASS has 3000W
RMS rated power in the range of 0.5 to 2 Ohms: (0.5 - 1 - 1.33 - 1.5 - 1.67 and 2 Ohms with same power);
SMART LEDS:
LEDs output signal level indicator on top of product;
RCA input for up to 4V RMS:
Input gain adjustment that allows head units up to 4V RMS output level;
Dual RCA IN / OUT Input:
RCA connector with input and output function, eliminates the needing of “Y”
cables for send the same unput signal to another amplifier;
Power connector for cables up to 1/0 AWG:
Allows the use of power cables with larger gauge (up to
50mm²) for higher performance;
AUTO-Restart Protections:
The amplifier automatically restarts after a protection event;
RAMP audio initialization:
After turning on the amplifier, audio is released gradually (ramp).
