PHASE CONTROL
OUT1 [0] 180
-Phase:
Allows inver ng the phase of the channel output signal, selec ng op on
[180].Select the channel using the OUT1 to OUT4 selec on keys and select the desired phase by
turning the encoder.
-Limiter:
Configures the limiter, which acts as a limiter on the maximum signal level of the
processor output, not to exceed the power limit defined for each channel.
Modes:
MAN =
Manual A ack and Release adjustment;
AUT:
Sets the A ack and Release
parameters automa cally, according to the frequency cutoff
(HPF).
Limiter parameters:
T
= Threshold, – Point from which the limiter starts to act (indicated by the ligh ng of the
RED LED on each channel). To turn off the limiter, turn the encoder clockwise un l [OFF] that
appears at the threshold value.
A
= A ack, – Time the limiter waits before reducing gain a er the signal exceeds the
threshold.
R
= Release, – Time it takes the limiter to return to its original gain a er the signal drops
below the threshold.
0d
MAN OUT1 +0
.
B
A: .0mS R
16mS
1
:
Threshold
Limiter
mode
Selected output
Release
A ack
Gain
Threshold
Input
Output
0°
0°
0°
+
-
-
+
Reverse polarity
Input
Output
180°
+
-
-
+
0°
180°
Phase
Selected output
Rotate the encoder to change
theselected parameter
Click on the encoder centerto select
the desired parameter
Click
08
