Input clip indicator LED:
It shows that the signal is reaching the maximum limit of the processor
input, which causes signal distor on. If it comes on, reduce the volume of the signal source and
readjust the system gains accordingly.
Limiter / clip LEDs:
They have a dual func on: They indicate that the signal from that output has
reached the maximum level (when the limiter is off) or the actua on of the limiter (when the
signal reaches the threshold defined in the limiter).
Power connector:
See page 12.
RCA signals input:
Input for low level / high impedance (RCA) signals.
WIRE High Level Input:
Input for high level / low impedance signals (from the speaker output of
the players or mul media center).
It features func on of triggering through the input signal, so it eliminates the use of the
REMOTE IN wire from the power connector when using this input.
Note:
The system is designed for use in virtually all mul media head units on the market.
However, on some head units , you may not get the trigger effect due to the type of audio output
circuit. In this case, use the REMOTE wire for triggering it normally.
INPUTS
INPUT
CLIP
Automa c Remote
HIGH LEVEL IN
A
B
+
-
+
-
OUT IN
OUT CLIP
OUT CLIP
OUT CLIP
OUT CLIP
Rotary
encoder
LCD Display
Signal Input
(A & B)
Input clip
LED indicator
LED indicators
limiter and clip and
output
High Level input
(B and A)
Power supply
connectors
Select / Mute
keys
Signal output ways 1 ~ 4
PRO 2.4 S
TARAMPS
Idioma/language
>PORTUGUES
INITIAL SETUP:
When turned on for the first me, the
processor waits for the language to be set. Choose the
desired language and confirm with a quick touch in the center
of the encoder.
Screens & basic operation:
Turning the encoder knob (clockwise or counterclockwise), adjusts the master volume (Input
volume).
Processor overview
03
