DELAY ----> OUT1
A
A
A
Rotate the rotary encoder to set the delay amount to be applied.
The voice coils of each transducers isn't aligned inside the acoustic box, so there is some delay
that can degrade the perfect audio playing. The
Delay
feature apply different delay amount for
each output way, in order to get the perfect audio alignment.
Acoustic box front panel
Reference position (*)
Measure the other channels and find the measure . Set
the closest measurement (in cm) for each channel.
Set the reference coil (*) farthest from the box panel (in
our example, the reference was the center of the horn
coil)
Repeat the procedure for the other channels (the
channel selection can be done through the keys of each
channel).
A
1
2
3
Selected Output
Delay me
Distance
Delay:
Set the delay to be applied to audio signal, for systems alignment. The posi on of
transducer's voice coil should be taken in account in order to set the op mal delay value.
0.0cm 0.000ms
How to set the delay parameter value (centimeter):
07
