![Taramps EQ BASS Instruction Manual Download Page 8](http://html.mh-extra.com/html/taramps-0/eq-bass/eq-bass_instruction-manual_818828008.webp)
01
EQ BASS
- Now you can control 100% of your amplifier remotely, through the EQ BASS.
Volume, Bass Boost, High Pass and Low Pass and a Limiter, turning each song into a truly
customized sound experience.
07
10 - ON:
Indicates that EQ BASS is on.
1- LEVEL:
Adjusts the input sensitivity of the BASS EQ, which allows for a perfect match the
output signal levels of virtually all models of CD/DVD head units on the market. Even 3V input
is possible.
5 - BOOST:
Boost for Sub-bass, with a variable amplitude from 0 to +10dB at the frequency
defined in FREQ.
6 - FREQUENCY:
Determines the Bass Boost acting frequency from 35Hz to 60Hz.
7 - SUBSONIC FILTER (HPF):
Variable adjustment from 8Hz to 30Hz, which determines the
beginning of the amplifier's operating frequency.
9 - LIMITER:
Allows you to adjust the output limiter threshold.
2 - ON:
Indicates that the amplifier connected to the MONITOR is on.
3 - CLIP:
Indicates that the amplifier connected to the MONITOR is clipping.
4 - PROT:
Indicates that the amplifier connected to the MONITOR is in protection mode.
8 - LOW PASS FILTER (LPF):
Variable adjustment from 60Hz to 250Hz, which determines the
end of the amplifier's operating frequency.
Front panel functions
Presentation
1
2 3 4
5
6
7
8
9
10
Rear panel functions
3 - POSITIVE POWER TERMINAL:
Use a 1.5mm² ( 16 AWG) cable straight from the positive
terminal of the battery with fuse or circuit breaker (1A) as close as possible to the battery.
1- NEGATIVE POWER TERMINAL:
Use the shortest possible 1.5mm² cable, connected to the
negative pole of the battery.
using a good quality shielded cable to avoid noise pickup.
5 - MONITOR:
Cable connection (Accessory included) that allows monitoring of theamplifier
via ON, CLIP and PROT.
6 - INPUT:
Signal input to be equalized. Connect it to the CD/DVD Player's RCA output,
2 - REMOTE TERMINAL:
It must be connected to the remote output of the CD/DVD player
using a 0.75mm² (18 AWG) cable.
4 - OUTPUT:
Audio signal output. It transmits the signal to the amplifier after passing through
the equalizers.
1 2 3
4
5
6