S n a p S t a n d
M X S e r i e s
™
3
Setting up the MX Series
™
Brake
Faspin
Locking Bar
Handle
Plug
Locking
Handle
Hex Bolt
MX Locking Bar Assembly includes:
(2) Locking bars,
(4) Handle Plugs, (4) Faspins, (4) Hex Bolts
1.
Insert Hex Bolt through Locking bar
of your MX Series
™
Brake and into the
base of Locking bar(s) as indicated us-
ing the 3/8" Hex Bolts provided. HAND
TIGHTEN ONLY. Repeat for other side.
2.
Attach the Locking bar over the Handle
Plugs and secure them with Faspins.
Now tighten the 3/8" Hex Bolts with a
9/16" wrench. Handle can be detached
from now on by simply removing the
Faspins.
1.
First insert one end of the Handle Plug
into Lifting / Bending Handle and install
Faspin through holes.
2.
Next, insert Handle Assembly into hole
in bottom of Moving Hinge. Align hole
in hinge with Handle Plug and insert
screw using Phillips Screw Driver as
shown. Secure with 1/4-20 Lock Nut
Repeat for other handles. To remove
handles, simply remove Faspins. Al-
ways use more than one handle when
bending.
Locking bar Installation
Lifting/Bending Handle Installation
Exploded view of
Handle Assembly
Faspin
Handle
Plug
Lifting/
Bending
Handle
1/4-20 x 1 1/2"
Screw
1/4-20
Lock Nut
Moving
Hinge
Secure with
1/4-20 Lock Nut
