S n a p S t a n d
M X S e r i e s
™
8
Installing a MX Series
™
Brake on MX Stand
™
STEP 5
Align the hole in the Fixed Hinge with the Slot on the Stand Top
Bracket. See 5a.
Insert Faspin through the Stand Top Bracket and into the Fixed
Hinge to secure Brake in place. See 5b.
The Brake must be secured with Faspins on the Left & Right
Stand Leg Assemblies.
Using 2 people, set Brake on Stand with the hinges above the
Front Support Tube.
3/8-16 Knob
STEP 6
Place Back Rail Clamp on the Back Rail. Slide Knob through
the Wedge and turn clockwise into the Threaded Insert.
See 6.
Back Rail Clamp Assembly must be attached on Left and
Right Stand Leg Assemblies.
5b
5a
6
Stand Back Rail
Clamp Wedge
Stand Back
Rail Clamp
Removing a MX Series
™
Brake from MX Stand
™
- Removing the brake from the MX Stand is essentially the opposite of attaching it to the stand.
- Remove the Back Rail Clamp Assembly from the Stand.
- Lift the Moving Hinge and remove the Faspins and place in the Stand Leg Faspin storage hole.
