<Sleep Mode>
To further minimize power consumption when the monitors are not in use,
Sleep mode can be used. The sleep mode options are -1hr, 1.5hrs, 2.5hrs, 3hrs
& 5hrs. To resume normal operation a command must be sent to the
<Sleep Mode> /cont.
system, for example, a master volume change or preset recall. This can be any
command sent via the master display of any master monitor on the network, the
remote, iDP SOFT
TM
or the PC-iP software.
<Backlight>
Three modes of operation can be set for the backlight display on the master
Ellipse monitors.
On
The display backlight will stay on unless the sleep mode function is activated.
Auto
The display backlight will light when any of the LCD keys are touched on
the monitors. The backlight will also light when the monitors are activated from
the ‘Standby’ or ‘Sleep’ states.
Off
The display backlight is always off.
<Store Master Volume>
When this box is checked the current master volume setting will be stored when
Standby
or
Sleep
modes takes effect.
If the box is not checked then the system will revert to –50dB(default) when the
monitors are reactivated.
16
