RAPID TROUBLESHOOTING
www.tanningessentials.co
PROBLEM
CAUSE
WHAT TO DO
There is a ‘E’
showing in
place of the
number setting
on the display
face.
Overheated or electrical
malfunction
This will go down once the
machine has cooled down
This will not disappear if the
machine is no longer able to
function.
The spray is
spluttering
Solution in cup low
Control dial is set too low
Nozzle may be blocked
Air pressure is low
Add solution to the cup
Increase power
Perform secondary maintenance
Increase air pressure
Clean filter in machine
There is a ‘C’
showing in
place of the
number setting
on the display
face.
Your filter needs to be cleaned
Remove the filter from the base of
the unit and rinse in warm water.
Wait until filter is completely dry
before re-fitting. To clear the setting
hold down the heat button and the
display will return to normal.
No solution is
coming out of
the spray
applicator
Nozzle may be blocked
Solution in cup too low
Trigger is jamming
Solution Dial on applicator set
too low
Spray warm water through the
applicator
Add solution to the cup
Spray warm water through the
applicator while the Solution Dial
is set at C and pull the trigger
repeatedly until it frees
Increase solution dial on applicator,
number 1 being the lowest and
Number 6 being the highest setting
