Tanita WB-380 Instruction Manual Download Page 16

Page: 16 / 20

11. Output data format

This section covers the exporting of data from the scale to an external device (e.g. PC) using a RS-232C and USB compliant signal.

•RS-232C and USB interface are for data OUTPUT ONLY!

•This scale is not capable of receiving instructions from an external device.

Note:

•An RS-232C connector (D sub 9-pin female) and USB connector (B-type 4-pin female) are located on the back of the display unit.

•Please provide your own cables as necessary as none are included.

RS-232C :Straight D sub 9-pin (male) – D sub 9-pin (female)

USB

:A-type 4-pin (male) – B-type 4-pin (male)

•Select Switch : Please select which interface you would like to use

If you want to use the USB output, you must install the necessary driver on to your PC, available to download

from

http://www.tanita.com

Specifications

Signal Line Name and Connection Method

Communications standard

Terminal no.

Signal name

TXD

GND

Communications method

Signal speed

Data bit length

Parity

Stop bit

Terminator

EIA RS-232C compatible

USB

Asynchronous transaction

9600 baud

8 bits

None

1 bit

CR+LF

RS-232C Port

USB Port

RS-232C/USB Select SW

Summary of Contents for WB-380





















Search results

Summary of Contents for WB-380

Reviews:

Related manuals for WB-380

Brands by name

Popular brands

Tanita WB-380, Instruction Manual

Search results

Summary of Contents for WB-380

Reviews:

Related manuals for WB-380

Brands by name

Popular brands