Tanita WB-380, Instruction Manual

Page: 12 / 20

E
n
g
12
(or )
d
d
d
d
d
2. BMI Weighing
1) Turn on the power by pressing the key.
2) After all the segments flash, [0.0lb / 0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. “
(Hold)” sign will appear in the upper
left corner of the display.
5) Press the key (or ). The default height [5ft7.0in / 170cm] will be displayed.
6) Set the height with the key.
7) Once the height and weight have been established, press the key.
The weight and BMI calculation will then be displayed.
When the scale is connecting to an external device, weight, height and BMI data will be exported
at this time.
8) The scale will automatically shut off in 30 seconds.
The setting of height for BMI is can be accomplished in any one of the following means by press-
ing the key (or ).
•Before stepping on the scale.
d
d
d
d
d
d
8. Operation
1. Standard Weighing Procedures
1) Turn on the power by pressing the key.
2) After all the segments flash, [0.0lb / 0.0kg] is displayed.
3) The person to be weighed should still in the middle of the platform.
4) The weight will be locked-in and displayed on the display. “ (Hold)” sign will appear in the upper
left corner of the display.
When the scale is connected to an external device, weight data will be exported at this time.
5) The scale will automatically shut off in 30 seconds.
Note:
•Do not press the key while standing on the scale, as accurate measurement will not be
possible.