Tangent Scale Models
PS-2CD 4000 Kit Assembly Instructions
5
4.
Attach slope sheet:
Remove the slope sheet pieces from the parts sprue pictured below. Note
that one slope sheet part has 3 holes in it; this is for the model’s B end, or where the brake
appliances will go. Note there is a “recess” where the vertical parts of the end slope sheets sit.
The front part of the channel needs to line up with the slope sheet part you are adding. In other
words, the slope sheet part is not long enough side to side, and the channel part in the car is the
remaining width for the part. Repeat the process at the “A” end with the remaining part.
Slope
sheet
pieces
Slope
sheet sits
in body
