Tangent Scale Models
PS-2CD 4000 Kit Assembly Instructions
10
9.
Attach the brake cylinder/fulcrum/clevis/horizontal support piece to the coupler
underframe and slope sheet:
Degate and clean the brake
cylinder/fulcrum/clevis/horizontal support piece, located on the “Brake Details and Stirrup
Steps“ part sprue. Note that there are two holes underneath the brake cylinder part; these
mount in the two holes on top of the bolster. Note that the lower rod should hang below the
bolster. Also, the long L-shaped piece at top cements to the end sheet now, and touches the
back of the B end upright later (step 11 below).
