5
Instructions
BATTERY REPLACEMENT
1. Your sensor faucet requires four (4) AA alkaline batteries. If the AC adapter is
plugged in, unplug it from its power source.
2. Remove the battery cover’s three (3) fasteners and pull cover away from the
control box.
3. Remove the old batteries.
4. Install the new AA batteries, making sure that the + and – ends are facing the
correct direction. Return the battery cover to its spot and tighten fasteners. If the
AC adapter is to be used, plug it in at this time.
5. With the disconnection of power, the sensor range is saved and will revert to the
last setting when power is restored.
Q&A
1. Q: Can I operate the faucet manually, without using the electronic eye?
A: Yes. Press the on/off button and water will start flowing. To turn water off,
press on/off button again. If you forget to turn the water off, the faucet will
automatically turn it off after 30 seconds.
2. Q:What is the optimal sensing distance?
A: Just in front of the water stream on the side towards the user.
3. Q: Does the electronic eye require special maintenance?
A: In order for the sensor to function, the electronic eye must be clean. Use only
mild soaps and water. Wipe with a soft cloth.
4. Q: How often should I clean the filter?
A: Depending on the quality of the water in your area, every 4-12 weeks.
5. Q:Why doesn’t the water shut itself off after I have moved my hands away from
the electronic eye?
A:Sensor range could be too long. User may have to adjust sensor range.
6. Q: No water will come out of the faucet and the red LED stays on. What is
the problem?
A: Replace the batteries.
