4
Instructions
Important Safety Instructions
DANGER: Immediate hazards which will result in severe personal
injury or death.
WARNING: Hazards or unsafe practices which could result in severe
personal injury or death.
CAUTION: Hazards or unsafe practices which may result in minor
personal injury or product or property damage.
WARNING: Failure to read, understand or follow these instructions
could lead to hazards or unsafe practices which could result in
severe personal injury or death.
CAUTION: Do not utilize chemicals in the hose &/or the reel.
Chemicals can cause premature failure of the hose &/or the seals.
CAUTION: Operators need to be instructed on the safe, proper use and
maintenance of this product. Keep this manual for future reference.
Hazards or unsafe practices may result in minor personal injury or
product or property damage.
TOOLS
(a) wrench: 17mm & 19mm; (b) adjustable wrench: 24mm to 27mm; (c) nut driver:
8mm and 10mm; (d) cross-recess driver #2, and (e) small & medium ext. retaining
ring pliers.
Installation
MOUNTING
Reels complete with hose come set
at proper tension and are ready to
install. (Fig. 1) The fixed base of reel
allows mounting in several different
positions including wall mount, base
down, or base up. If moving guide
arm, four nuts (13mm) on
side of reel must be removed.
General Mounting Requirements
• (Fig. 2) Main-shaft must be
horizontal.
• (Fig. 3a) Swivel inlet must be
connected with flexible hose.
Rigid pipe may cause premature
wear and affect performance.
• (Fig. 3b) Centerline of spool
assembly must be in-line with
hose pull out. To adjust guide arm,
remove screws holding it to base
and rotate to desired group of
mouting holes.
Fig. 1
Fig. 2
Fig. 3a
Fig. 3b
