background image

iiiiii

iv

DANGERS

Be sure to follow the warnings and notices about use from 
your PC maker when installing and using this unit.

Do not take apart, repair or modify the main unit. Doing so 
may cause fire or electrocution.

If water or a foreign body enters in this unit, turn the power 
off and remove the batteries. Continued use may cause fire 
or electrocution.

Do not use this unit in wet or humid places, such as a 
bathroom.

Store RTR-

57

U main units, batteries and communication 

cables out of the reach of children. It is dangerous to touch 
or swallow batteries.

Connecting a communication cable that is connected to a 
PC or a data logger to the telephone cable may cause fire or 
damage.

If any smoke or strange smells are emitted from the unit, 
immediately turn the power OFF and remove the batteries. 
Continued use may cause fire or electrocution.

Do not drop the unit, or expose the unit to a strong impact. If 
that happens to the unit, immediately turn the power OFF 
and remove the batteries. Continued use may cause fire or 
electrocution.

CAUTIONS

This unit is not water-resistant. If the unit gets dirty, wipe it 
with a clean cloth and a mild detergent.

Do not put your fingers or foreign matter into the 
communication port.

Battery life depends on the kind of the batteries, 
measurement environment, communication frequency, 
ambient temperature, and battery quality.

Do not use batteries other than specified. Doing so may 
cause fire or damage.

Do not use an AC adaptor other than specified. Doing so may 
lead to fire or damage.

Battery terminals may provide insufficient contact due to age 
or vibration. This may lead to data loss.

If the unit will not be used for period of time, for safety 
reasons please remove the battery. If left in the unit, it may 
leak and lead to malfunctioning.

Condensation may occur if the unit is moved from one 
environment to another where the difference in temperature 
is great. Use the unit in an environment where the ambient 
temperature is from 

0

 to 

50

 

32

 to 

144

 

F

 and the 

humidity is 

90

RH (no condensation) or less.

Summary of Contents for RTR-57U








































Reviews: