manualshive.com logo in svg

T&D RTR-500DC, Manual

Share
Download
T&D RTR-500DC Manual Download Page 33

Carrying out Registration, Settings, and Operation 

33

Communication between RTR-500DC and PC  

Operations which require RTR-500DC   PC Communica-

tion 

Base Unit Settings, Settings Changes, Initialization, etc. 
Downloading Recorded Data from RTR-500DC to PC 

Have you already completed installing "RTR-500DC for Windows" 
and the USB device drivers? 

Do not connect more than one RTR-500DC at a time to the PC. 

Connect the RTR-500DC with the supplied USB communication cable 

to your PC to carry out communication. 

 

USB Communication 

Cable (provided) 

USB mini-B plug 

To the USB Communication 

Cable Jack 

USB-A plug 

To a USB port on PC 

 

- Make sure that the cable is inserted fully, so as not to cause an improper 

connection.

If the screen does not change after connecting the device, the USB driver may not 

have been installed correctly. Please see [Help for Unit Recognition Failure] and check 

the USB driver.

Summary of Contents for RTR-500DC

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands