T&D RTR-500DC, Manual

Page: 27 / 88

Getting Ready
27
Installing the USB Device Driver
Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the
supplied software first.
If the Base Unit is not an RTR-500DC, please follow directions for installing
the USB Device Drivers found in the Introductory Manual that came with the
Base Unit you are using.
1.
Open the “RTR-500DC
for Windows” from the
Start Screen or Start
Menu.
Launcher Window
2.
Open the RTR-500DC
Settings Utility.
3.
Connect the Unit with the supplied USB cable to your computer.
The USB driver installation will start automatically.
- Do not connect a Unit to your computer until the software has been installed.
4.
After the USB driver installation is completed, the factory default
settings will be displayed automatically in the settings window.