16
VISION 5000 Videoconferencing System
Installation
Power on monitor
Power on the monitor and use the monitor remote control to select the Audio/Video input used (refer to your
monitor manual). Remember to select S-video (S-VHS) input to avoid a black and white picture.
Example 29 monitor (not USA)
For the JVC av-29TS2/ BD3 29 monitor select the External input for Scart 1 and then select an S-VHS (S-
Video) signal. Do this by pushing the
0/AV
button on the monitor remote control until the
E1
message is
displayed. To select S-VIDEO input please do the following (using the monitor remote control):
Press
OK
.
The MENU appears.
Press
s
/
t
to select
EXT SOURCE
, then press
OK
.
The EXT SOURCE menu appears.
Press
s
/
t
to select
EXT SETTING
, then press
OK
.
The EXT SETTING menu appears.
Press
s
/
t
to select an
EXT
input terminal.
Press yellow button.
The S-VIDEO input indication appears.
Toggle between Composite Video and S-VIDEO with the yellow button.
Press
OK
to exit menu.
Example 33 monitor (not USA)
For the Grundig M84 33 monitor you have to select the External input for Scart 1 and then select S-VHS(S-
Video) signal. Do this by pushing the
0/AV
button on the remote control until the
AV 1
message is displayed
on the monitor. To select S-VIDEO input please do the following:
Press i and
OK
.
The DIALOG CENTER appears.
Press
p+
s
/
t
p-
to select
AUDIO/VIDEO INPUTS
, then press
OK
.
The AUDIO/VIDEO INPUTS menu appears.
Select
Video recorder
using the
p+
s
/
t
p-
keys.
Press the
-
+
buttons until the
SVHS input indication appears.
Press the
TXT
button to exit from the menu.
You only need to set this once as the monitor will remember its setting even if powered off.
