Installing the Equipment
Page 2-8
Instruction Manual: Professional Receivers and Decoders (IRD)
ST.TM.TT1220.1
2.5.3
AC Power Supply Cord
General
A mains cord is normally supplied with this product. It is fitted with a
moulded plug suitable either for mainland Europe, the UK or USA as
advised when ordered.
NOTE…
The TT1220 is not fitted with an ac power supply ON/OFF switch. Ensure the socket-outlet supplying
the equipment is installed near the equipment, so that it is easily accessible.
When replacing the power cord in the USA, make sure to always replace it
with a cord of the same type. The cord should be of type: Feller type SVT
cord rated 3x18 AWG with plug 498 G and appliance coupler C13.
Disposal of Moulded Plugs
If the moulded plug fitted to the mains cable supplied with this equipment
is not required, use another cable. If the supplied plug is to be changed,
cut it off and dispose of it safely.
WARNING…
IF THE MOULDED PLUG FITTED TO THE MAINS CABLE SUPPLIED WITH THIS EQUIPMENT IS
NOT REQUIRED; PLEASE CUT IT OFF AND DISPOSE OF IT SAFELY. FAILURE TO DO THIS MAY
ENDANGER LIVES AS LIVE ENDS MAY BE EXPOSED IF THE REMOVED PLUG IS INSERTED
INTO A MAINS OUTLET.
Wire Colours
The wires in the supply cord are coloured as shown in Table 2.2.
Table 2.2: Supply Cord Wiring Colours
UK (BS1363)
Europe (CEE 7/7)
USA (NEMA 5-15P)
Earth
Green-and-yellow
Green-and-yellow
Green
Neutral
Blue
Blue
White
Live
Brown
Brown
Black
2.5.4
Connecting the Equipment to the AC Power Supply
As there is no power switch fitted to this unit, ensure the local ac power
supply is switched OFF before connecting the supply cord.
Connect the mains lead to the TT1220 and then to the local supply.
