manualshive.com logo in svg

TANDBERG TT1220 Series, Instruction Manual

Share
Download
TANDBERG TT1220 Series Instruction Manual Download Page 101

Instruction Manual: Professional Receivers and Decoders (IRD)

Page D-1

ST.TM.TT1220.1

Annex D

D.

 

Alarm Categories and Conditions

Contents

D.1 Alarm Conditions ...................................................... D-3

D.2 Input Stage Alarms................................................... D-3

D.2.1 QPSK Input Alarms ...................................... D-3
D.2.2 ASI Input Alarms .......................................... D-3

D.3 Output Stage Alarms ................................................ D-4

D.3.1 Video Output Alarms.................................... D-4
D.3.2 Audio Output Alarms.................................... D-4
D.3.3 VBI Output Alarms ....................................... D-5
D.3.4 Data Output Alarms...................................... D-5

D.4 CA and PSI/SI Related Errors .................................. D-6

D.4.1 CA Related Alarms....................................... D-6
D.4.2 PSI/SI Related Alarms ................................. D-6

D.5 Hardware Related Alarms.........................................D-7

D.5.1 Config Alarms...............................................D-7

List of Tables

Table D.1: QPSK Alarm Categories and Conditions..................... D-3
Table D.2: ASI Alarm Categories and Conditions......................... D-3
Table D.3: Video Alarm Categories and Conditions...................... D-4
Table D.4: Audio Alarm Categories and Conditions...................... D-4
Table D.5: VBI Alarm Categories and Conditions......................... D-5
Table D.6: Data Output Alarm Categories and Conditions ........... D-6
Table D.7: CA Related Alarm Categories and Conditions ............ D-6
Table D.8: PSI/SI Related Alarm Categories and Conditions ....... D-7
Table D.9: Hardware Configuration Related Alarm Categories

and Conditions............................................................. D-7

Summary of Contents for TT1220 Series



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands