RX8310/RX8315/RX8330 Distribution Receiver
19
5.4
Configuring the Video Output
!
The unit will automatically decode the first video component that it finds
within the selected service.
!
An alternative video component may be selected from the service tab on the
Web Control interface.
NOTE
If the incoming feed is High Definition video and the unit has the
relevant decode licenses enabled then the output is automatically
downconverted to Standard Definition at the CVBS connector.
5.5
Configuring the Audio Outputs
!
The unit will automatically decode the first two audio components that it finds
within the selected service.
!
Alternative audio components may be selected from the service tab on the
Web Control interface
5.6
Configuring for Single-service Decryption
!
If the service selected for video decode (see
Section 5.3
) contains encrypted
components these components will automatically be decrypted by the unit.
!
The outgoing feed from the unit will contain these decrypted components.
5.7
Configuring for Multi-service Decryption
!
When a feed containing more than one encrypted services is applied to the
unit, the first 24 services detected are automatically decrypted. A list of these
services can be found in the service table off front panel menu 4.
!
This list may be modified from the CA tab on the Web Control interface.
NOTE
This is only applicable for units models that have Multi-service
Decryption licenses enabled.
