manualshive.com logo in svg

TANDBERG RX8310, User Manual

Share
Download
TANDBERG RX8310 User Manual Download Page 13

 RX8310/RX8315/RX8330 Distribution Receiver 

 

 

13 

 

4 

Operating the Equipment From A Web Browser 

4.1 Introduction 

A PC Web Browser may be used to configure, control and monitor the Receiver. 
The PC must be connected to either of the two IP control ports on the rear of the 
receiver (labelled ETHERNET 1 and 2 or CONTROL 1 and 2). Before operation, 
the User Settings for the control port must be entered via the system menu on the 
front panel. 

If the receiver is connected to an existing network or is not on the same subnet as 
the control PC then assistance from the network administrator may be required in 
modifying the User Settings. 

To assist with troubleshooting, the IP control ports will respond to ICMP PING 
request messages. 

The reference guide contains more detail on all receiver User Settings available on 
the Web Browser Interface.  

 

4.2 

Receiver Web Browser Interface 

To use the receiver Web Browser Interface, the IP address assigned to the 
receiver control port in the front panel system menu should be entered into the 
address field of the Web browser. 

Provided that the network is correctly configured, the following status page should 
be automatically loaded and displayed. 

 

Summary of Contents for RX8310

























Reviews:

No comments

Brands by name

Popular brands

Load more brands