manualshive.com logo in svg

TANDBERG RX8310, User Manual

Share
Download
TANDBERG RX8310 User Manual Download Page 17

 RX8310/RX8315/RX8330 Distribution Receiver 

 

 

17 

 

5 

Quick Start Guide - Using the Front Panel Control  

5.1 

Making Signal Connections to the Unit 

!

If you have an incoming satellite RF feed, connect this to the rear panel 
connector marked 

RF Input

 

!

If you have an incoming ASI (Fiber) feed, connect this to the connector 
marked 

ASI Input

 

!

Decoded PAL or NTSC video is output on connectors 

CVBS 1

 and 

CVBS 2

. 

These outputs are identical in operation. 

!

 Decoded analogue or digital audio is output on connectors 

AUDIO OUT 1

 

and 

AUDIO OUT 2

. Adaptor cables are used to provide the connector type 

required for the installation. 

!

The incoming feed is routed through the unit and output on connectors  

ASI OUT 1

 and 

ASI OUT 2

 

!

For models with option RX83XX/HWO/IP/OUT fitted, the incoming feed is 
also routed through the unit and output on connectors 

IP OUT 1

 and 

IP OUT 2

 

!

If the unit is to be controlled by Web browser or PC based control system 
then the control PC should be connected to connector 

CONTROL 1

 or 

CONTROL 2

  

!

If the unit is to be used to decrypt (non-Director) encrypted feeds then a 
Conditional Access Module and card should be inserted in the slot labelled 

Conditional Access Interface 

in the rear panel 

5.2 

Configuring the Inputs  

5.2.1 ASI 

Input 

To configure the unit for ASI (Fiber) input. 

!

Select 

ASI

 

input from a submenu off menu 2 

5.2.2 

Satellite (DVB-S or DVB-S2) Input 

Ensure that the incoming feed is connected to connector 1.  

To configure the unit for Satellite input the following User Settings should be 
modified. All of these settings may be found in submenus off front panel menu 2. 

 

Summary of Contents for RX8310

























Reviews:

No comments

Brands by name

Popular brands

Load more brands