RX8310/RX8315/RX8330 Distribution Receiver
18
!
Select
SAT
input
Set the LNB frequency
Set the Satellite frequency
Set the Symbol Rate
Set the Modulation scheme and FEC
Set the Roll-Off
Set the set the LNB power output
Set the set the LNB power output level
A description of each of these User Settings can be found in the
Reference Guide
.
NOTE
If the unit has successfully locked to the incoming feed, then the TS
Lock value in menu 2 should be LOCKED.
5.3
Selecting a Decode Service (Program)
Navigate to the Service Selection menu (Menu 3).
!
For incoming feeds containing only a single service the service will be
selected automatically
!
For incoming feeds containing more than one service press
Edit
and, using
the
Up
and
Down
pushbuttons, scroll through the service name list. Then
press
Save
to select the required service.
!
Alternatively, use the
Right
pushbutton to move the cursor to the service ID
field and press
Edit
. Enter the required service ID using the
Up
and
Down
pushbuttons for each digit of the service ID.
NOTE
If the unit has successfully selected a service, then menu 3 should
display the Service ID and Service name.
