37
MXP Series Video Endpoints
User Guide
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
GRAPHICS GROUP
GRAPHICS GROUP
GRAPHICS GROUP
Creating MultiSite entries
Part 2: Adding members to the MultiSite Contacts group
Observe the following:
•
My Contacts can hold up to 50 MultiSites Contacts.
•
Entries in
My Contacts
can be members of as many groups
as you like.
•
MultiSite contacts can only be recruited from
My Contacts
.
•
MultiSite Contacts is an optional feature, which may or
may not be installed on your system. Contact your system
administrator or your TANDBERG representative for details.
•
The exact number of simultaneous video and telephone
participants your TANDBERG video system actually sup-
ports is configuration dependent, i.e. whether you depend
on your system’s built-in MultiSite capabilities, and whether
additional infrastructure products like external MCUs are
available. If in doubt, contact your system administrator.
1.
Navigate down to the first line below the
Name
field…
2.
Press the
OK
key to show the contents of the
My
Contacts
, allowing you to choose participants…
3.
Press the Ok key to have
your selection inserted in the
MultiSite Contact list…
4.
Move down to the next
Add
Participant
and repeat the
procedure until you have
added the participants you
want to add…
5.
Once all the participants have
been added, move down to
OK
and press the
OK
key to leave the
menu putting changes into effect.
www.cisco.com
